Jump to content

Pennsylvania Railroad class DD2

From Wikipedia, the free encyclopedia
PRR DD2
Type and origin
Power typeElectric
BuilderPRR Juniata Shops[1]
Build dateFebruary 7, 1938[1]
Total produced1[1]
Specifications
Configuration:
 • Whyte4-4-0+0-4-4
 • AAR2-B+B-2
 • UIC(2'B)(B'2)
Gauge4 ft 8+12 in (1,435 mm) standard gauge
Leading dia.36 in (914 mm)
Driver dia.62 in (1,575 mm)
Trailing dia.36 in (914 mm)
Length72 ft 6+14 in (22.10 m)
Width10 ft 6+14 in (3.21 m)
Height15 ft 0 in (4.57 m) (pantographs locked down)
Adhesive weight296,000 lb (134,000 kg)
Loco weight450,000 lb (200,000 kg)
Electric system/s11 kV, AC 25 Hz overhead
Current pickup(s)2 roof-mounted pantographs (normally only one raised)
Traction motors4 × 1,250 hp (930 kW) Westinghouse 428-A traction motor paired sets
TransmissionAC current fed via transformer tap changer to motors geared to a Quill drive
Performance figures
Maximum speed70 mph (110 km/h)
Power output5,000 hp (3,700 kW)
Tractive effort71,500 lbf (318 kN)
Career
OperatorsPennsylvania Railroad
ClassDD2
Number in class1
Numbers5800
LocaleWilmington, Delaware-Philadelphia, Pennsylvania, latterly Baltimore, Maryland area.
First run1938
ScrappedSeptember 1962[2]
DispositionScrapped

The Pennsylvania Railroad's class DD2 was a single prototype electric locomotive never placed into series production.[3] It was intended as an improved and simplified GG1 for use on the planned, but never built, extension of the PRR's electrification west of Harrisburg, Pennsylvania.[1] The one locomotive produced was numbered #5800 and used in regular Baltimore tunnel helper service until it was scrapped in September 1962.[2]

Design, construction and testing

[edit]

On May 21, 1937, a meeting was held in Philadelphia to outline the design of a new electric freight locomotive. The meeting was attended by the PRR and Baldwin, as well as electrical suppliers General Electric and Westinghouse, and the transportation engineering firm Gibbs & Hill, who were consultants on the proposal to extend electrification to Pittsburgh. The locomotive being designed was what became the DD2.[4]

Technical details

[edit]

Although the design specified either passenger gearing or freight gearing, the prototype was only ever used with freight gearing. Its wheel arrangement was 4-4-0+0-4-4 in the Whyte notation, or 2-B+B-2 in the AAR's system.

It had two frames, hinged together in the middle, with the driving wheels and motors mounted directly to each frame, two pairs per side. A swinging four-wheeled, unpowered truck was mounted at the outer end of each frame. The bodywork, mounted above, swivelled on mounts on each of the two main frames. This was an identical layout to the better-known GG1 electric locomotives, but with four driven axles instead of six. Each driven wheel had two electric motors, each rated at 625 hp (466 kW), giving a total rating of 5,000 hp (3,700 kW) for the locomotive.

Although it had fewer driven wheels than the GG1, the total power output was slightly greater, thanks to newer and more powerful motors. Weight on the driven wheels was approximately 286,000 lb (130,000 kg).,[5] compared to the GG1's 300,000 lb (140,000 kg), meaning that in similar conditions of adhesion the GG1 was slightly at an advantage in terms of applying power to the rail, but the difference was not great. Styling was also similar to the GG1's.

References

[edit]
  1. ^ a b c d Pennsylvania Railroad Technical and Historical Society (August 2004). "PRR Chronology 1938" (PDF). Retrieved 2008-08-27.
  2. ^ a b Pennsylvania Railroad Technical and Historical Society (June 2004). "PRR Chronology 1962" (PDF). Retrieved 2008-08-27.
  3. ^ Staufer, Alvin F.; Pennypacker, Bert (1962). Pennsy Power: Steam and Electric Locomotives of the Pennsylvania Railroad, 1900-1957. Research by Martin Flattley. Carollton, Ohio: Alvin F. Staufer. p. 298. ISBN 978-0-9445-1304-0.
  4. ^ Pennsylvania Railroad Technical and Historical Society (August 2004). "PRR Chronology 1937" (PDF). Retrieved 2008-08-27.
  5. ^ Pennsylvania Railroad. "DD2". PRR Locomotive Diagrams. Retrieved 2006-01-05. (simple drawing and specifications, for general reference by railroad staff).