Jump to content

Implicit function theorem

From Wikipedia, the free encyclopedia
(Redirected from Implicit Function Theorem)

In multivariable calculus, the implicit function theorem[a] is a tool that allows relations to be converted to functions of several real variables. It does so by representing the relation as the graph of a function. There may not be a single function whose graph can represent the entire relation, but there may be such a function on a restriction of the domain of the relation. The implicit function theorem gives a sufficient condition to ensure that there is such a function.

More precisely, given a system of m equations fi(x1, ..., xn, y1, ..., ym) = 0, i = 1, ..., m (often abbreviated into F(x, y) = 0), the theorem states that, under a mild condition on the partial derivatives (with respect to each yi ) at a point, the m variables yi are differentiable functions of the xj in some neighborhood of the point. As these functions generally cannot be expressed in closed form, they are implicitly defined by the equations, and this motivated the name of the theorem.[1]

In other words, under a mild condition on the partial derivatives, the set of zeros of a system of equations is locally the graph of a function.

History

[edit]

Augustin-Louis Cauchy (1789–1857) is credited with the first rigorous form of the implicit function theorem. Ulisse Dini (1845–1918) generalized the real-variable version of the implicit function theorem to the context of functions of any number of real variables.[2]

First example

[edit]
The unit circle can be specified as the level curve f(x, y) = 1 of the function f(x, y) = x2 + y2. Around point A, y can be expressed as a function y(x). In this example this function can be written explicitly as in many cases no such explicit expression exists, but one can still refer to the implicit function y(x). No such function exists around point B. However at B it is possible to write a function x(y) that describes the solution set locally.

If we define the function f(x, y) = x2 + y2, then the equation f(x, y) = 1 cuts out the unit circle as the level set {(x, y) | f(x, y) = 1}. There is no way to represent the unit circle as the graph of a function of one variable y = g(x) because for each choice of x ∈ (−1, 1), there are two choices of y, namely .

However, it is possible to represent part of the circle as the graph of a function of one variable. If we let for −1 ≤ x ≤ 1, then the graph of y = g1(x) provides the upper half of the circle. Similarly, if , then the graph of y = g2(x) gives the lower half of the circle.

The purpose of the implicit function theorem is to tell us that functions like g1(x) and g2(x) almost always exist, even in situations where we cannot write down explicit formulas. It guarantees that g1(x) and g2(x) are differentiable, and it even works in situations where we do not have a formula for f(x, y).

Definitions

[edit]

Let be a continuously differentiable function. We think of as the Cartesian product and we write a point of this product as Starting from the given function , our goal is to construct a function whose graph is precisely the set of all such that .

As noted above, this may not always be possible. We will therefore fix a point which satisfies , and we will ask for a that works near the point . In other words, we want an open set containing , an open set containing , and a function such that the graph of satisfies the relation on , and that no other points within do so. In symbols,

To state the implicit function theorem, we need the Jacobian matrix of , which is the matrix of the partial derivatives of . Abbreviating to , the Jacobian matrix is

where is the matrix of partial derivatives in the variables and is the matrix of partial derivatives in the variables . The implicit function theorem says that if is an invertible matrix, then there are , , and as desired. Writing all the hypotheses together gives the following statement.

Statement of the theorem

[edit]

Let be a continuously differentiable function, and let have coordinates . Fix a point with , where is the zero vector. If the Jacobian matrix (this is the right-hand panel of the Jacobian matrix shown in the previous section): is invertible, then there exists an open set containing such that there exists a unique function such that , and . Moreover, is continuously differentiable and, denoting the left-hand panel of the Jacobian matrix shown in the previous section as: the Jacobian matrix of partial derivatives of in is given by the matrix product:[3]

Higher derivatives

[edit]

If, moreover, is analytic or continuously differentiable times in a neighborhood of , then one may choose in order that the same holds true for inside . [4] In the analytic case, this is called the analytic implicit function theorem.

Proof for 2D case

[edit]

Suppose is a continuously differentiable function defining a curve . Let be a point on the curve. The statement of the theorem above can be rewritten for this simple case as follows:

Theorem — If then in a neighbourhood of the point we can write , where is a real function.

Proof. Since is differentiable we write the differential of through partial derivatives:

Since we are restricted to movement on the curve and by assumption around the point (since is continuous at and ). Therefore we have a first-order ordinary differential equation:

Now we are looking for a solution to this ODE in an open interval around the point for which, at every point in it, . Since is continuously differentiable and from the assumption we have

From this we know that is continuous and bounded on both ends. From here we know that is Lipschitz continuous in both and . Therefore, by Cauchy-Lipschitz theorem, there exists unique that is the solution to the given ODE with the initial conditions. Q.E.D.

The circle example

[edit]

Let us go back to the example of the unit circle. In this case n = m = 1 and . The matrix of partial derivatives is just a 1 × 2 matrix, given by

Thus, here, the Y in the statement of the theorem is just the number 2b; the linear map defined by it is invertible if and only if b ≠ 0. By the implicit function theorem we see that we can locally write the circle in the form y = g(x) for all points where y ≠ 0. For (±1, 0) we run into trouble, as noted before. The implicit function theorem may still be applied to these two points, by writing x as a function of y, that is, ; now the graph of the function will be , since where b = 0 we have a = 1, and the conditions to locally express the function in this form are satisfied.

The implicit derivative of y with respect to x, and that of x with respect to y, can be found by totally differentiating the implicit function and equating to 0: giving and

Application: change of coordinates

[edit]

Suppose we have an m-dimensional space, parametrised by a set of coordinates . We can introduce a new coordinate system by supplying m functions each being continuously differentiable. These functions allow us to calculate the new coordinates of a point, given the point's old coordinates using . One might want to verify if the opposite is possible: given coordinates , can we 'go back' and calculate the same point's original coordinates ? The implicit function theorem will provide an answer to this question. The (new and old) coordinates are related by f = 0, with Now the Jacobian matrix of f at a certain point (a, b) [ where ] is given by where Im denotes the m × m identity matrix, and J is the m × m matrix of partial derivatives, evaluated at (a, b). (In the above, these blocks were denoted by X and Y. As it happens, in this particular application of the theorem, neither matrix depends on a.) The implicit function theorem now states that we can locally express as a function of if J is invertible. Demanding J is invertible is equivalent to det J ≠ 0, thus we see that we can go back from the primed to the unprimed coordinates if the determinant of the Jacobian J is non-zero. This statement is also known as the inverse function theorem.

Example: polar coordinates

[edit]

As a simple application of the above, consider the plane, parametrised by polar coordinates (R, θ). We can go to a new coordinate system (cartesian coordinates) by defining functions x(R, θ) = R cos(θ) and y(R, θ) = R sin(θ). This makes it possible given any point (R, θ) to find corresponding Cartesian coordinates (x, y). When can we go back and convert Cartesian into polar coordinates? By the previous example, it is sufficient to have det J ≠ 0, with Since det J = R, conversion back to polar coordinates is possible if R ≠ 0. So it remains to check the case R = 0. It is easy to see that in case R = 0, our coordinate transformation is not invertible: at the origin, the value of θ is not well-defined.

Generalizations

[edit]

Banach space version

[edit]

Based on the inverse function theorem in Banach spaces, it is possible to extend the implicit function theorem to Banach space valued mappings.[5][6]

Let X, Y, Z be Banach spaces. Let the mapping f : X × YZ be continuously Fréchet differentiable. If , , and is a Banach space isomorphism from Y onto Z, then there exist neighbourhoods U of x0 and V of y0 and a Fréchet differentiable function g : UV such that f(x, g(x)) = 0 and f(x, y) = 0 if and only if y = g(x), for all .

Implicit functions from non-differentiable functions

[edit]

Various forms of the implicit function theorem exist for the case when the function f is not differentiable. It is standard that local strict monotonicity suffices in one dimension.[7] The following more general form was proven by Kumagai based on an observation by Jittorntrum.[8][9]

Consider a continuous function such that . If there exist open neighbourhoods and of x0 and y0, respectively, such that, for all y in B, is locally one-to-one, then there exist open neighbourhoods and of x0 and y0, such that, for all , the equation f(x, y) = 0 has a unique solution where g is a continuous function from B0 into A0.

Collapsing manifolds

[edit]

Perelman’s collapsing theorem for 3-manifolds, the capstone of his proof of Thurston's geometrization conjecture, can be understood as an extension of the implicit function theorem.[10]

See also

[edit]

Notes

[edit]
  1. ^ Also called Dini's theorem by the Pisan school in Italy. In the English-language literature, Dini's theorem is a different theorem in mathematical analysis.

References

[edit]
  1. ^ Chiang, Alpha C. (1984). Fundamental Methods of Mathematical Economics (3rd ed.). McGraw-Hill. pp. 204–206. ISBN 0-07-010813-7.
  2. ^ Krantz, Steven; Parks, Harold (2003). The Implicit Function Theorem. Modern Birkhauser Classics. Birkhauser. ISBN 0-8176-4285-4.
  3. ^ de Oliveira, Oswaldo (2013). "The Implicit and Inverse Function Theorems: Easy Proofs". Real Anal. Exchange. 39 (1): 214–216. arXiv:1212.2066. doi:10.14321/realanalexch.39.1.0207. S2CID 118792515.
  4. ^ Fritzsche, K.; Grauert, H. (2002). From Holomorphic Functions to Complex Manifolds. Springer. p. 34. ISBN 9780387953953.
  5. ^ Lang, Serge (1999). Fundamentals of Differential Geometry. Graduate Texts in Mathematics. New York: Springer. pp. 15–21. ISBN 0-387-98593-X.
  6. ^ Edwards, Charles Henry (1994) [1973]. Advanced Calculus of Several Variables. Mineola, New York: Dover Publications. pp. 417–418. ISBN 0-486-68336-2.
  7. ^ Kudryavtsev, Lev Dmitrievich (2001) [1994], "Implicit function", Encyclopedia of Mathematics, EMS Press
  8. ^ Jittorntrum, K. (1978). "An Implicit Function Theorem". Journal of Optimization Theory and Applications. 25 (4): 575–577. doi:10.1007/BF00933522. S2CID 121647783.
  9. ^ Kumagai, S. (1980). "An implicit function theorem: Comment". Journal of Optimization Theory and Applications. 31 (2): 285–288. doi:10.1007/BF00934117. S2CID 119867925.
  10. ^ Cao, Jianguo; Ge, Jian (2011). "A simple proof of Perelman's collapsing theorem for 3-manifolds". J. Geom. Anal. 21 (4): 807–869. arXiv:1003.2215. doi:10.1007/s12220-010-9169-5. S2CID 514106.

Further reading

[edit]